Last updated: 8 November 2026
It was Friday evening, the sofa was already claimed, and Sara had found a film the whole family actually agreed on — a rare win, and the reason she was searching for beetv chromecast. The film was open on her phone, the television across the room was blank, and nobody wanted to crowd around a six-inch display for two hours. She wanted the picture on the big screen, the sound through the TV speakers, and her phone free to pause when someone went for snacks. The honest answer is less simple than a single button, but it is still doable once you know which route fits your TV.
Quick answer
BeeTV does not offer a verified cast button inside the app, so do not hunt for one that may not be there. The reliable routes are: mirror your phone screen to a Chromecast with the Google Home app, cast a browser tab from a computer where that option is available, or install BeeTV directly on a Chromecast with Google TV. All three need your phone and TV device on the same Wi-Fi network. Mirroring works for a one-off film night, while the direct install gives the smoothest picture and lets your phone rest.
What BeeTV Chromecast casting means, and what it does not
With some apps, you tap a small cast symbol, the phone hands the stream to the TV, and the TV takes over. That is what many people expect here, but there is no verified cast symbol inside BeeTV to tap, and no promise from BeeTV that such a feature exists.
Screen mirroring is different. Your phone copies everything on its display and sends that copy to the TV. It works for a film night, but the picture can only be as steady as your Wi-Fi, the phone has to stay awake, and anything on the phone screen shows up on the TV too.
Casting from a browser is a middle route. A computer browser can send a tab to a Chromecast, and the TV shows that tab. That helps if you are already on a laptop, but it is not the same as the app handing a clean video stream to the TV, and it ties up the laptop while you watch.
Installing the app directly on a Chromecast with Google TV is different again, and it is not casting at all. That device is an Android TV device with its own home screen and apps. Once BeeTV is on it, the film plays on the TV itself, the remote controls it, and the phone can stay in a pocket. If you watch this way more than once a week, this is the route worth setting up.
What does not work is worth naming plainly. You cannot cast while the phone screen is off and expect the film to keep playing through mirroring, because mirroring stops when the phone sleeps. You cannot expect a sharper picture than your connection and the source can carry, and you cannot fix weak Wi-Fi by tapping a setting inside the app.
Before you start: what you need
- A phone with BeeTV already installed and working, with a film or show ready to play
- A Chromecast, a Chromecast with Google TV, or a television with Chromecast built in, plugged in and set up
- The same Wi-Fi network for your phone and your TV device — this trips up most people, especially in homes with separate network names for different rooms or bands
- The Google Home app on your phone, for the mirroring route
- A computer with a browser that supports casting, only if you plan to try the browser route
- Your TV remote, or the Chromecast with Google TV remote, for the direct-install route
- A charger nearby, because mirroring drains a phone battery faster than normal playback
Check the network first: open Wi-Fi settings on your phone, note the network name, and check the TV device is on that same name.
Method 1: Mirror your phone screen with Google Home
This is the route for a standard Chromecast and for a TV with Chromecast built in. It needs no extra hardware, and it works with what is already on your phone.
1. Open Google Home and find your TV
Open the Google Home app and look for your Chromecast or TV in the device list. If it is missing, check both devices are on the same Wi-Fi network, then refresh the list. A device set up long ago sometimes needs the TV switched on and awake before it shows up.
2. Start mirroring, then open BeeTV
Tap the device, then choose the option to cast the screen. Your phone will ask you to confirm that it can share its screen. Accept, and after a short pause your phone display should appear on the television. If the picture looks small or boxed in, that is normal: the TV is copying the shape of your phone screen.
With mirroring running, open BeeTV and start the film. Turn the phone sideways for a wider picture, and use the phone volume buttons or the TV remote for sound. Keep the phone awake — if the screen locks, the mirror usually stops. When the film ends, stop mirroring from the notification on your phone or from inside Google Home, rather than just switching the TV off.
Mirroring suits a single film night. It is simple and needs no install on the TV. Its trade-offs are a phone that must stay awake and charged, notifications that can appear on the big screen, and a picture that depends heavily on your Wi-Fi.
Method 2: Cast from a browser tab
This route fits a laptop better than a phone. Use a computer on the same Wi-Fi network as the Chromecast, open the browser, and go to the page you want to show. Close extra tabs, because a busy browser can make the cast stutter.
Open the browser menu and look for the cast option. Choose your Chromecast or TV from the list, and send the current tab rather than the whole desktop, which copies everything. Start playback and leave the laptop open with the browser in the foreground — if the lid closes, the cast can drop. Use the laptop or TV remote for volume, and pause from the browser when someone needs a break. Handy as a backup, but less comfortable than a remote on the sofa for a long film.
Method 3: Install BeeTV directly on Chromecast with Google TV
If your device is a Chromecast with Google TV, this is the route to choose for regular viewing. It turns the Chromecast into a TV device in its own right, so there is no phone screen to copy and no laptop to keep awake.
Switch the TV to the Chromecast with Google TV input and open its home screen. Use search or the apps section to find BeeTV, and install it from a source you trust. If the app is not listed in the store on your device, do not download installer files from random sites.
Once installed, open BeeTV from the home screen or the apps list and set it up as you did on your phone. Check the picture fills the screen and the sound comes through the TV speakers. Browse with the Chromecast remote, pick the film, press play, and use the remote for pause and volume. The phone can stay aside. This is the closest the setup gets to an ordinary TV app, and the most comfortable way to watch night after night. After the first watch, check the app opens cleanly a second time; if it is not on the home screen, look in the full apps list.
Readers who also use Amazon’s stick may find the step-by-step Firestick setup useful, and the Smart TV guide covers television sets more broadly. For getting the app onto a phone, see our guide to BeeTV on Android.
Playing and controlling playback
The controls change with the route, and knowing which device is in charge avoids a lot of armchair confusion.
With mirroring, the phone is the remote. Pause and volume happen on the handset — convenient in your hand, awkward when it is charging across the room. Keep it nearby, and turn on Do Not Disturb before the film starts so a message does not flash across the TV.
With the browser route, the laptop is the remote: the spacebar usually pauses, and the laptop or TV controls set the sound. Do not close the lid mid-film. With the direct install, the TV remote is the remote — the simplest setup for a group, because anyone on the sofa can pause. Subtitles, where the app offers them, are best switched on before the film starts.
Start the film a few minutes before everyone sits down. Play the opening, check the sound is clear and the picture is steady, pause it, and then call everyone in.
Common problems and fixes
The cast option is missing
BeeTV itself may simply not show one — that is expected, not a fault with your phone. Use Google Home to mirror instead, or the direct install on a Chromecast with Google TV. If Google Home also shows no cast option, check the app is up to date and both devices are on the same Wi-Fi network.
The TV is not found
Restart the Chromecast or TV and the phone, and check both are on the same network name. If the TV was set up on a guest network or a different band, it will not appear. Move both to the same network, wait a minute, and refresh the device list in Google Home.
Casting drops halfway through
This usually points to Wi-Fi, not the app. Move the phone closer to the router, pause other downloads and video calls, and try a wired connection for the TV device where that is possible.
The picture stutters or freezes
Lower the playback quality inside BeeTV if that choice is offered, close other apps, and keep the phone plugged in. A phone that is hot, low on battery, or busy in the background mirrors badly. Restarting the phone before a film night often helps.
There is sound but no picture, or picture but no sound
Stop mirroring and start it again. If the fault stays, restart the TV device and the phone, then try a different film to check whether the fault follows one title or every title. Check the TV is on the right input and the volume is up on both devices.
The phone gets hot or the battery drains fast
Mirroring is hard work for a phone: it plays video, sends it over Wi-Fi, and keeps the screen lit at the same time. Plug the phone in, lower the brightness, close other apps, and take the case off if it traps heat. If the phone is too hot to hold comfortably, stop and let it cool. For regular viewing, the direct install avoids this entirely.
If trouble continues inside the app itself, our fixes when BeeTV stops working cover the app-side checks worth trying before you blame the TV.
Safety and legal notes
Only watch content you have the right to watch, and check what a source offers before you rely on it. An app that plays a film does not, by itself, tell you where that film came from or whether the provider holds the rights to show it. Be careful with links and installer files passed around online, and only install apps from sources you trust. Keep your phone, TV device, and apps updated. Do not enter payment details inside an unfamiliar app, and do not share account details in public comments or forums. Use a unique password for any account you create.
Alternatives
If casting keeps fighting you, another route may suit your household better. A Firestick plugs in, has its own remote, and runs apps directly on the television. An Android TV stick or box does much the same job. The main BeeTV download page is a starting point for a new device.
A simple HDMI cable is the least fussy backup: plug the phone or laptop into the TV, switch the TV to that input, and play. You lose wireless freedom, but you gain a steady picture that does not depend on Wi-Fi. Licensed apps are worth checking too — a known provider may already carry the film you want, with a proper TV app and subtitles.
Frequently asked questions
No verified cast button inside BeeTV could be found for this guide. Mirror the phone screen with Google Home, cast a browser tab, or install the app directly on a Chromecast with Google TV.
The phone and the Chromecast are usually on different Wi-Fi networks, or the TV device is asleep. Put both on the same network name, wake the TV, restart both devices, and refresh the list in Google Home.
Mirroring copies the phone screen, so when the screen sleeps the copy stops. Keep the phone awake and plugged in while mirroring, or use the direct install, where the TV plays on its own.
Screen mirroring through Google Home works from an iPhone as well as an Android phone, as long as both devices share the same Wi-Fi network. The steps are similar, though the menus will look a little different.
Mirroring adds a second job: the phone must play the film and send it over Wi-Fi at the same time. A weak signal, a busy network, or a hot phone can cause stutter. Move closer to the router, close other apps, plug the phone in, or switch to the direct install.
For regular viewing, yes. The TV plays the film itself, the remote controls it, and the phone is free. Mirroring is still right for a one-off film night or a standard Chromecast, where no direct install is available.
Back on the sofa
Sara ended up mirroring that Friday film from her phone, with the charger plugged in and Do Not Disturb switched on. The family watched together on the big screen and paused for snacks without a scramble. The next week she tried the direct install on the Chromecast with Google TV, and that became the regular setup — phone aside, remote in hand, film on the TV where it belonged. Start with mirroring for tonight, and set up the direct route if you plan to do this again next Friday.
External sources (open in a new tab): Chromecast — Wikipedia and Android TV — Wikipedia.
Last updated: 8 November 2026
